Search
Close this search box.

Cellular communicator G16T

Connects to any alarm panel which has a landline dialer.

Transmits full event information to the security company’s monitoring station.

Works with Protegus app. Users can arm/disarm their alarm system remotely and receive notifications about events.

Can be ordered with 2G or 4G modem.

  • 4G

  • 5G ready

  • Nano

  • Programmable contacts

  • Protocol: SIA

  • Protocol: TRK

  • Smart app

Description

Features

Connects to panel’s landline dialer:

  • Communicator can be connected to control panel’s landline dialer with 2 or 4 wires.
  • When connected with 4 wires, the landline between the panel and communicator will be monitored.

Sends events to monitoring station receiver:

  • Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.
  • Can send event messages to SIA DC-09 receivers.
  • Can send event messages to SUR-GARD receivers. The annex has a table for converting Contact ID codes to SIA codes.
  • Connection supervision by polling to IP receiver every 30 seconds (or by user defined period).
  • Backup channel, that will be used if connection with the primary channel is lost.
  • Events can be reported to CMS with SMS messages. SMS will be sent even if data connection stops working in the mobile operator network.
  • With parallel communication channels events can be sent to two receivers at same time.
  • When Protegus service is enabled, events are first delivered to CMS, and only then are sent to app users.

Works with Protegus app:

  • Push” and special sound notifications informing about events.
  • Remote system Arm/Disarm.
  • Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
  • Different user rights for administrator, installer and user.
  • Users can also be informed about events with SMS messages and phone calls.

Notifies users:

  • Users can be notified about events not only with Protegus app, but also with SMS messages and a call.

Controllable outputs and inputs:

  • 1 output, controlled via:
    • Protegus
    • SMS message.
  • 2 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals
  • Add additional inputs and controllable outputs with wired and wireless iO

Quick setup:

  • Settings can be saved to file and quickly written to other communicators.
  • Two access levels for configuring the device for CMS administrator and for installer.
  • Remote configuration and firmware updates.

 

Video

Setting up with DSC Neo panel

Specifications

Parameter Description
Connects to panel Landline dialer (TIP RING contacts)
Dual purpose terminals [IN/OUT] 2, can be set as either NC; NO; NC/EOL; NO/EOL; NC/DEOL; NO/DEOL (10 kΩ) type inputs or open collector (OC) type outputs with current up to 0,15 A, 30 VDC max.

Expandable with iO series expanders

Output 1, OC type, up to 0,15 A, 30 V max

Expandable with iO series expanders

LTE FDD B1/B2/B3/B4/B5/B8/B12/B13B18/B19/B20/B25/B28
LTE TDD B39 (only Cat M1)
Cat M1/Cat NB1 B1/B2/B3/B4/B5/B8/B12/B13B18/B19/B20/B25/B28
GSM 850 / 900 / 1800 /1900MHz
Power supply voltage 10-18 V DC
Current consumption 60-100 mA (on standby)

Up to 250 mA (while sending data)

Transmission protocols TRK, DC-09_2007, DC-09_2012, TL150
Message encryption AES 128
Changing settings With TrikdisConfig computer program remotely or locally via USB Mini-B port

Remotely with SMS messages

Operating environment Temperature from -10 °C to 50 °C, relative humidity – up to 80% at +20 °C
Communicator dimensions 92 x 65 x 26 mm
Weight 80 g

Downloads

Manuals

IconG16T User manual


May 5, 2023 | 4 MB

    Marketing

    IconG series 5G CatM1


    March 25, 2024 | 951.67 KB

    IconG16T Brochure


    August 25, 2022 | 1 MB

    IconTrikdis communicator comparison


    March 21, 2024 | 1.48 MB

    IconTrikdis Products catalogue


    March 20, 2024 | 20.54 MB

      Certificates

      IconCertificate of Conformity GRADE 4 G16T


      January 22, 2024 | 886.78 KB

        Software and firmware

        IconTrikdisConfig Full

        Latest
        April 21, 2023 | 66.42 MB

          No downloads found!

            Reviews

            There are no reviews yet.

            Be the first to review “Cellular communicator G16T”

            Your email address will not be published. Required fields are marked *

            0
              0
              Quote Cart
              Your cart is empty

              Support ticket

              Support contacts
              Links