Cellular communicator G16 Rev4

Category:

Cellular communicator G16_441W directly connects to supported DSC, Paradox, UTC Interlogix (CADDX), Innerrange, Texecom, Honeywell, Crow and Pyronix alarm panels.

Communicator transmits full event information to the Central Monitoring Station.

Communicator also works with Protegus application. With Protegus users can control their alarm system remotely and get notifications about security system events. Protegus app is compatible with all security alarm panels from various manufacturers that are supported by the G16_441W communicator. Communicator can transmit event notifications to the Central Monitoring Station and work with Protegus simultaneously.

Communicator G16_441W can connect directly to DSC®, Paradox®, UTC Interlogix® (CADDX), Innerrange®, Texecom®, Honeywell®, Crow® and Pyronix® control panels. For panels from other manufacturers use the G16T communicator.

Sends events to monitoring station receiver:

  • Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.
  • Can send event messages to SIA DC-09 receivers.
  • Can send event messages to SUR-GARD receivers. The annex has a table for converting Contact ID codes to SIA codes.
  • Connection supervision by polling to IP receiver every 30 seconds (or by user defined period).
  • Backup channel, that will be used if connection with the primary channel is lost.
  • Events can be reported to CMS with SMS messages. SMS will be sent even if data connection stops working in the mobile operator network.
  • With parallel communication channels events can be sent to two receivers at same time.
  • When Protegus service is enabled, events are first delivered to CMS, and only then are sent to app users.

Works with Protegus app:

  • Push” and special sound notifications informing about events.
  • Remote system Arm/Disarm.
  • Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
  • Remote temperature monitoring (with iO or iO-WL expanders).
  • Different user rights for administrator, installer and user.
  • Users can also be informed about events with SMS messages and phone calls.

Notifies users:

  • Users can be notified about events not only with Protegus app, but also with SMS messages and a call.

Controllable outputs and inputs:

  • 3 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals.
  • Outputs controlled by the Protegus
  • Add additional inputs and controllable outputs with wired and wireless iO

Quick setup:

  • Settings can be saved to file and quickly written to other communicators.
  • Two access levels for configuring the device for CMS administrator and for installer.

 

Compatible with

PC585, PC1404, PC1565, PC1616, PC1832, PC1864, PC5015, PC5020

SPECTRA SP4000, SP5500, SP6000, SP7000, SP65, 1727, 1728, 1738

MAGELLAN MG5000, MG5050

DIGIPLEX EVO48, EVO192, EVOHD, NE96, EVO96

ESPRIT E55, 728ULT, 738ULT

NetworX (Caddx) NX-4v2, NX-6v2, NX-8v2, NX-8e

Premier 24, 48, 88, 168, 412, 816, 832, 832+

Premier Elite 12, 24, 48, 64, 88, 168

Inception, Integriti

Ademco Vista-15, Ademco Vista-20, Ademco Vista-48

Runner 4/8, 8/16

*Red - remote Arm/Disarm via Serial bus.

** Communicator is compatible with other manufacturer control panels when connected with GSM communicators G16T

Text version

DSC®
PC585, PC1404, PC1565, PC1616, PC1832, PC1864, PC5015, PC5020

PARADOX®
SPECTRA SP4000, SP5500, SP6000, SP7000, SP65
MAGELLAN MG5000, MG5050, MG5050E
DIGIPLEX EVO48, EVO192, EVOHD, NE96, EVO96
SPECTRA 1727, 1728, 1738
ESPRIT E55, 728ULT, 738ULT UTC

Interlogix®
NetworX (Caddx) NX-4v2, NX-6v2, NX-8v2, NX-8e

Honeywell®
Ademco Vista-15, Ademco Vista-20, Ademco Vista-48

Texecom®
Premier 24, 48, 88, 168, 412, 816, 832, 832+ 
Premier Elite 12, 24, 48, 64, 88, 168

Crow®
Runner 4/8, Runner 8/16

Innerrange®
Inception

Pyronix®
MATRIX 424, MATRIX 832, MATRIX 832+, MATRIX 6, MATRIX 816

Specifications

ParameterDescription
Dual purpose terminals [IN/OUT]3, can be set as either NC; NO; NC/EOL; NO/EOL; NC/DEOL; NO/DEOL (2,2 kΩ) type inputs or open collector (OC) type outputs with current up to 0,15 A, 30 VDC max.

Expandable with iO series expanders.

LTE FDDB1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28
LTE TDDB38/B39/B40/B41
UMTSB1/B2/B4/B5/B6/B8/B19
GSM850/900/1800/1900 MHz
Power supply voltage10-18 V DC
Current consumption60-100 mA (on standby)

Up to 500 mA (while sending data)

Transmission protocolsTRK, DC-09_2007, DC-09_2012, TL150
Message encryptionAES 128
Changing settingsWith TrikdisConfig computer program remotely or locally via USB Mini-B port

Remotely with SMS messages

Operating environmentTemperature from -10 °C to 50 °C, relative humidity – up to 80% at +20 °C
Communicator dimensions92 x 65 x 26 mm
Weight80 g

Modifications

  • G16_441x – 4 version, 1 SIM, 4G modem.

Downloads

Manuals


Software


Marketing material




Certificate


Reviews

There are no reviews yet.

Be the first to review “Cellular communicator G16 Rev4”