Ethernet communicator E10C


Ethernet communicator with 4 inputs for transmitting messages from control panel’s PGM outputs or from various sensors.


  • 4 inputs IN1-IN4 for connection with:
    • control panel PGM outputs from any manufacturer
    • various sensors
    • other devices
  • Messages are sent in TCP/IP or UDP/IP protocol to the static IP addresses of CMS
  • If connection is lost with the main IP address, messages are automatically sent to the backup IP address
  • Constant control of connection with CMS
  • Port for connecting an additional VHF/UHF, Ethernet or GSM transmitter
  • Access to module configuration is secured with two level password
  • Quick and easy configuration via USB
  • Metal casing for additional mainboard protection


Inputs (IN1-IN4)4 x NC/NO/EOL-2,2 kΩ type
Outputs (OUT1)1 x OC type, switching 30 V, 500 mA
Ethernet portIEEE802.3, 10 Base-T, port RJ45 
Supported protocolsTCP/IP or UDP/IP
Alarm messages encodingIn Contact ID code
Memory100 last events
Power supplyDC 12,6 V ± 3 V
Currentidle running 60 – 100 mA, within transmitting up to 250 mA
Operating temperature rangefrom -10 °C to +55 °C, when relative air humidity 80 % with 20 ºC
Dimensions85 x 65 x 25 mm
Weight0,1 kg




Marketing material





There are no reviews yet.

Be the first to review “Ethernet communicator E10C”