Ethernet communicator E10T


Ethernet communicator, which can connect to any intruder alarm panel via its landline communicator.


  • E10T transfers alarm messages in TCP/IP or UDP/IP protocol to static IP address of CMS
  • In case of communication failing with main IP address, E10T turns to transmit to back-up IP address automatically
  • Compatible with the telephone communicator of control panel
  • Transmissions of alarm messages are in Contact ID codes
  • Secured access to set configuration
  • Setting of configuration via USB or remotely


Power supply 12,6 VDC ± 3 V
Current 120 mA (idle mode), up to 250 mA (transmitting mode)
Ethernet output IEEE802.3, 10 Base-T, jack RJ45
Data carrier content Contact ID codes
Memory Up to 100 unsent messages
Input 1, for NC / NO / EOL=2,2 kΩ type circuit
Setting of configuration with program Econfig via USB or remotely via Internet connection
Operating environment temperature -10 °C to 55 °C, relative air humidity 80 % (+20 °C)
Dimensions  65 x 79 x 25 mm 
Weight 0.1 kg




Marketing material




There are no reviews yet.

Be the first to review “Ethernet communicator E10T”