Connects to supported DSC, Honeywell, Paradox, Pyronix, UTC Interlogix (Caddx), Innerrange and Texecom alarm panels via serial or keypad bus.
Simple and fast to install communicator which will upgrade any fire alarm panel for event signaling via cellular network.
Communicator E16T is intended to upgrade any intruder alarm panel with telephone line communicator (TIP RING) for event signaling via wired Internet (Ethernet).
Communicator E14 is intended to upgrade compatible intruder alarm panels for event signalling via wired Internet (Ethernet).
VHF or UHF radio transmitter compatible with Paradox, DSC, Caddx, Pyronix and other manufacturer control panels, reading messages directly from control panel DATA BUS.
VHF or UHF dual band radio transmitter for sending messages of Paradox, DSC, Caddx, Pyronix panels.
RF transmitter T16 is a multifunctional radio device used for transmitting security control panel event messages via TRIKDIS radio networks.
The transmitter can send its own event messages and event messages received from security control panels to the ARC (alarm receiving center) with the possibility to forward to the end user.
W485 Wi-Fi module is an add-on to TRIKDIS communicators G16, G16T, control panel SP231 and radio transmitter T16, providing WiFi connectivity.
With communicators G16 and G16T it provides a transparent primary communication channel via WiFi. This allows to control the alarm system with communicator remotely via Protegus app when it is connected via WiFi.
With control panel SP231 and radio transmitter T16 the w485 module only sends events, without the ability to remotely control via Protegus app via WiFi.
With communicators G16 and G16T. WiFi connection credentials are set in G16 or G16T settings, in RS485 modules menu. Please find configuration instructions in G16 and G16T installation manual.
The “Ethernet” communicator E485 is compatible with the Cellular communicators G16 and G16T (firmware from 1.32) and is designed to transmit data and control commands via the wired Internet network. By using the E485 in conjunction with the G16 or G16T, messages are sent to the CMS (central monitoring station) via the wired internet network and in this case the mobile Internet is not used. When communication is interrupted on the wired internet network, messages are sent to the monitoring station via the mobile internet network. Insert SIM card into the communicator G16 (G16T), that worked E485.
E485 Communicator transmits complete information about events to the monitoring station receiver.