Ethernet communicator E10T
Ethernet communicator E10T

Ethernet communicator, which can connect to any intruder alarm panel via its landline communicator.

Communicator features:

 • E10T transfers alarm messages in TCP/IP or UDP/IP protocol to static IP address of CMS
 • In case of communication failing with main IP address, E10T turns to transmit to back-up IP address automatically
 • Compatible with the telephone communicator of control panel
 • Transmissions of alarm messages are in Contact ID codes
 • Secured access to set configuration
 • Setting of configuration via USB or remotely
Specifications
Power supply  12,6 VDC ± 3 V
Current  120 mA (idle mode), up to 250 mA (transmitting mode)
Ethernet output  IEEE802.3, 10 Base-T, jack RJ45
Data carrier content  Contact ID codes
Memory  Up to 100 unsent messages
Input  1, for NC / NO / EOL=2,2 kΩ type circuit
Setting of configuration  with program Econfig via USB or remotely via Internet connection
Operating environment  temperature -10 °C to 55 °C, relative air humidity 80 % (+20 °C)
Dimensions   65 x 79 x 25 mm 
Weight  0.1 kg