Cellular security control panel CG17
Cellular security control panel CG17

CG17 is a multifunctional security control panel with an integrated celullar communicator.

With the CG17 you can:

  • Install a simple security system that can be monitored and controlled remotely.
  • Control various equipment remotely (e.g. heating and ventilation systems, automatic gates) and monitor temperature.
  • Notify users about events.
  • Send event notifications to the receiver of a security company.

Messages to the security company

  • Reports events to TRIKDIS software or hardware receivers which are capable of working with any monitoring software.

  • Can report events to SIA DC-09 receivers.
  • In case connection to primary channel is lost, can send to backup receiver.
  • Can report events to the central monitoring station using SMS messages. Extremely useful because it works even when IP connectivity is disrupted in the mobile operator’s network.
  • Cellular network jamming recognition.
  • Can simultaneously report events to the security company’s receiver and work with the Protegus app. Possible to set priority for sending events to central monitoring station.

Messages to users

  • Calls specified phone numbers (up to 8 users) and informs about events using recorded voice messages.
  • Sends SMS messages about events.
  • “Push” and special sound event notifications using the Protegus application.

System and output control

  • Using Protegus app.
  • Using contact (iButton) key reader.
  • By calling the device’s phone number.
  • Using SMS messages.
  • Using an automatic “if...then” algorithm.  E.g. when an input is enabled or the temperature exceeds a certain limit, an output will be turned on.

Expander, GPS receiver and battery support

  • iO series expanders, which increase the number of inputs (IN) and outputs (OUT).
  • GPS receiver (useful for protecting ATMs and vending machines).
  • Backup power and charging of 12 V battery.

Settings and installation

  • Quick and simple installation.
  • Configuration of device either using an USB cable or remotely using TrikdisConfig software.
  • Remote updating of firmware.
  • Two types of access levels (accounts), for the installer and for the administrator.

Inputs and outputs

  • 1 input, 2 outputs and 3 double I/O terminals that can be set either as input (IN) or output (OUT) terminals.
  • One wire data bus (1-Wire) for connecting temperature sensors (up to 8) and a contact (iButton) key reader.
  • Using iO series expanders, the number of inputs (IN) or outputs (OUT) can be increased to 12.
CG17 control panel with 2G modem 
CG17 control panel with 3G modem

CG17 video



GSM modem frequencies

850 / 900 / 1800 / 1900 MHz

3G modem frequencies

800 / 850 / 900 / 1900 / 2100 MHz

Power supply voltage

16-24 VDC, 16-18 VAC

Current consumption

50 mA (stand-by),

Up to 200 mA (transmitting)

Communication with  ARC

Encrypted TCP/IP or UDP/IP, SMS, DC-09_2007, DC-09_2012

Battery charging current

Max 500 mA

Event encryption, key

TRK / 6 symbol key


Up to 60 messages

Inputs (max internal)

Up to 4 selectable type input: NC, NO, EOL (10kΩ)

Outputs (max internal)

Up to 5  x OC type outputs, (1 OUT, 2 OUT, 3 OUT – 100 mA; 4 OUT, 5 OUT – 1 A)

Partitions (Areas)


Event transmission

Contact ID codes

Encryption key

6 symbols encryption key

Operating environment

From -10 °C to 50 °C, with relative air humidity 80% when +20 °C


95x65x25 mm


0.10 kg