Two Way Wireless Shock & Glass Break Detector, providing detection coverage of 3600 measured from the sensor to the point on the glass farthest from the sensor.
The detector transmits series of messages for full communication administration (Alarms, Supervision, Tamper Status, Battery Status, Configuration, etc.) as well as test transmission signals.
| Detection Method | Omni directional Electret microphone |
| Modulation Type | GFSK |
| Frequency Band | 868-869MHz / 916-917MHZ |
| Identification | Unique ID serial number – 24 bit |
| Event Transmission | Alarm, Tamper, Supervision, Low Battery |
| LED Indications | LED during alarm |
| Alarm Period | 4 seconds |
| Range in open space | 500 m |
| Coverage Area | Wide Angle 3-6m radius |
| Tamper Switch | Front cover removal & Back tamper |
| Supervision | 7 min by default (programmable between 1 to 30 min) |
| Current Draw | Standby < 20µA Transmit mode ~35µA |
| RF Immunity | 10V/meter, 1MHz to 1000MHz |
| Power Supply | 1 x CR123 Battery |
| Battery Life | Up to 5 years |
| Operating temperature | -10°C to +55°C |
| Housing Material | Flame retardant ABS |
| Dimensions | 85mm x 53mm x 21mm |
| Weight (inc. battery) | 40 gr |
Glass Break Detector Brochure
Contacts:
Support:
Get Latest Update & Big Promotion For Subscribe Newslater
Reviews
There are no reviews yet.