Wireless Door/Window Magnetic Contact

Category:

This is  an  advanced  magnetic  contact sensor with integrated RF transceiver designed to be a fully supervised low-current device.

A built-in reed switch and/or an external wired input may be applied in this device.

To maximize security, an 8.2k end-of-line resistor is monitored on the external wired input.

Features

  • Internal Reed Switch
  • External Terminal Block for wired connection
  • AND/OR Mode available
  • Coverage 150m in open space
  • Powered by 1 lithium battery CR123
  • Battery life more than 4 years
  • Configurable over-the-air by the Base Station
  • Tamper Switch: Front cover and back tamper
  • Multicolor LED indications

Specifications

Detection MethodInternal reed switch or External magnet device
Modulation TypeGFSK
Frequency Band868-869MHz / 916-917MHZ
IdentificationUnique ID serial number – 24 bit
Event TransmissionAlarm, Tamper, Supervision, Low Battery
External InputUp to 15m with 8.2Kohm EOL resistor
LED IndicationsLED confirm each transmission
Range in open space500 m
Tamper SwitchFront cover removal & Back tamper
Supervision7 min by default (programmable between 1 to 30 min)
Current ConsumptionsStandby ~3 A
Receive mode ~29 mA
Transmit mode ~38 mA
Transmit power~10dBm
Power Supply1 x CR123 Battery
Battery LifeUp to 5 years
Operating temperature-10°C to +55°C
Dimensions97mm x 22mm x 21mm
Weight (inc. battery)40 gr
STANDARD COMPLIANCEEN50130-4
EN50130-5
EN301489-3
EN301489-1
EN61000-6-3
EN50131
Security Grade 2, Environmental Class II

Downloads

Marketing material


Reviews

There are no reviews yet.

Be the first to review “Wireless Door/Window Magnetic Contact”