Description

Features

Sends events to monitoring station receiver:

• Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.
• Can send event messages to SIA DC-09 receivers.
• Can send event messages to SUR-GARD receivers. The annex has a table for converting Contact ID codes to SIA codes.
• Connection supervision by polling to IP receiver every 30 seconds (or by user defined period).
• Backup channel, that will be used if connection with the primary channel is lost.
• When Protegus 2 service is enabled, events are first delivered to CMS, and only then are sent to app users.

Works with Protegus app:

• “Push” and special sound notifications informing about events.
• Remote system Arm/Disarm.
• Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
• Different user rights for administrator, installer and user.

Notifies users:

• Users can be notified about events with Protegus 2

Controllable outputs and inputs:

• 2 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals.
• Outputs controlled by the Protegus 2
• Add additional inputs and controllable outputs with iO-8

Quick setup:

• Settings can be saved to file and quickly written to other communicators.
• Two access levels for configuring the device for CMS administrator and for installer.
• Remote configuration and firmware updates.